Suzuki Samurai Transfer Case Mounted Hand Brake / Parking Brake Kit

Suzuki Samurais usually have a problem once you put on disk brakes- They have no parking brake. This solves that issue by adding a mechanical spot caliper to the back half of the Transfer Case, or upgrading your old drum brake from the older SJ models

Includes:

-Heavy Duty Tig Welded Bracketry Needed for Caliper Installation

-Bracket needed for re-routing of factory hand brake cable. (Uses Factory Cable)

-Grade 8.8 or higher hardware. Includes bolts for both Early and Late Samurai Flange Hole and Pattern sizes (8mm and 10mm)

-Brake Disk

-Bi-Color Zinc Plated for Corrosion Resistance

-Drill bits and hex impact driver socket needed for installation included.

Bolts to existing holes in the back of the case. Some drilling required for bracket to hold factory hand brake cable on frame. Drill Included.

Please Note: Does not work with all styles of transfer case mounting cradles / buckets / Skidplates. Will work with Low Range Off Road EOS Cradles.